Engineering polymers matched to the job
We pick the material to match the part's real constraints: temperature, UV, impact, stiffness or flexibility.
Standard polymers
For prototyping, visual parts and everyday use.
-
PLA
Polylactic acid
The most common filament: easy to print, accurate and available in many colours. Ideal for prototypes, models and lightly loaded visual parts.
-
PLA+
Toughened PLA
A toughened PLA, less brittle and more impact resistant while remaining easy to print.
-
PETG
Glycol-modified polyethylene terephthalate
A good balance of strength, toughness and chemical resistance. Suited to functional parts, housings and brackets.
-
ABS
Acrylonitrile butadiene styrene
A tough engineering plastic that handles heat better than PLA. Used for housings, covers and mechanical parts.
-
ASA
Acrylonitrile styrene acrylate
Similar to ABS but resistant to UV and weathering. The go-to choice for outdoor parts.
-
HIPS
High-impact polystyrene
A light, easily machined polystyrene, often used as a soluble support material for ABS.
Engineering polymers
For functional parts exposed to loads, heat or chemicals.
-
PC
Polycarbonate
A polycarbonate with high impact and heat resistance, for heavily loaded technical parts.
-
PC-ABS
Polycarbonate-ABS blend
A blend combining the strength of polycarbonate with the printability of ABS.
-
PA6 / PA12
Polyamide (nylon)
Tough, wear-resistant engineering nylons for gears, hinges, clips and sliding parts.
-
PP
Polypropylene
A light, flexible polypropylene with excellent chemical resistance, for living hinges and containers.
-
POM
Polyoxymethylene (acetal)
A low-friction acetal with high dimensional stability, for precise moving mechanical parts.
Carbon and glass fiber composites
High stiffness, low weight and excellent dimensional stability.
-
PLA-CF
Carbon-fiber filled PLA
Carbon-fibre filled PLA: stiffer, with a matte, premium finish for light visual parts.
-
PETG-CF
Carbon-fiber filled PETG
Carbon-fibre reinforced PETG: stiff, stable and strong, for brackets and functional parts.
-
PET-CF
Carbon-fiber filled PET
Carbon-fibre filled PET with excellent dimensional stability and heat resistance, for jigs, fixtures and technical parts.
-
ASA-CF
Carbon-fiber filled ASA
Carbon-fibre reinforced ASA: added stiffness plus UV resistance for outdoor technical parts.
-
PA-CF
Carbon-fiber filled polyamide
Carbon-fibre reinforced nylon: very stiff, light and heat resistant, for demanding mechanical and structural parts.
-
PA-GF
Glass-fiber filled polyamide
Glass-fibre reinforced nylon: robust, impact and heat resistant, with good wear resistance.
-
PC-CF
Carbon-fiber filled polycarbonate
Carbon-fibre reinforced polycarbonate: high stiffness and heat resistance for industrial parts.
Flexible materials and elastomers
For seals, guards, dampers and soft parts.
-
TPU
Thermoplastic polyurethane (85A to 98A)
A flexible, abrasion-resistant elastomer from 85A (very soft) to 98A (semi-rigid), for seals, guards, dampers and grips.
-
TPE
Thermoplastic elastomer
A very soft, rubber-like elastomer for parts that must deform and spring back.
-
PEBA
Polyether block amide
A light, highly resilient elastomer with excellent energy return, for soles, dampers and sports parts.
High performance
For extreme environments: high temperatures, aggressive chemicals, aerospace requirements. On request.
-
PEEK
Polyether ether ketone
A high-performance polymer with outstanding heat, chemical and wear resistance, used in aerospace, medical and industry. On request.
-
PEKK
Polyether ketone ketone
Similar to PEEK, with excellent strength at high temperature and good fire resistance. On request.
-
PEI
Polyetherimide (ULTEM type)
Polyetherimide (ULTEM type): stiff, heat resistant and inherently flame retardant, for aerospace and electronics. On request.
-
PPSU
Polyphenylsulfone
A polymer with high heat, impact and chemical resistance that can be sterilised. On request.
-
PPS
Polyphenylene sulfide
A very stable semi-crystalline polymer resistant to aggressive chemicals and high temperatures. On request.
-
PVDF
Polyvinylidene fluoride
A fluoropolymer with excellent chemical and UV resistance, for the chemical industry and aggressive fluids. On request.
Special filaments
Specific properties: fire safety, electronics, soluble supports or decorative finishes.
-
V-0
Flame-retardant polymers (UL94 V-0)
Flame-retardant filaments rated UL94 V-0, self-extinguishing. For electrical housings, vehicles and transport.
-
ESD
Anti-static and conductive filaments
Anti-static or conductive filaments that dissipate electrical charge, for sensitive electronics and ESD areas.
-
PVA
Polyvinyl alcohol
A water-soluble support material for complex shapes with internal cavities.
-
BVOH
Butenediol vinyl alcohol copolymer
A water-soluble support that dissolves faster than PVA and works with several materials.
-
Wood-fill
Wood-filled (wood look)
Wood-fibre filled filament with the look and feel of wood, for decorative objects and models.
-
Metal-fill
Metal-filled (metallic look)
Metal-powder filled filament with metallic weight and finish, polishable, for decorative parts.
Need another material? Describe your need and we'll look into it. Request a free quote
Process
From your need to the finished part
-
01
Needs analysis
Send us a part, a drawing, a photo or an idea. We assess feasibility and send you a quote.
-
02
Scanning & CAD design
3D scanning of the existing part and modeling to your dimensions, tolerances and constraints.
-
03
Prototype & validation
A printed prototype to validate fit, form and strength before production. This step is optional: if your part is already validated, we go straight to production.
-
04
Production
Manufacturing of the single part or the batch in the material suited to real-world use.
A project or a part to reproduce?
Send us your ideas, files, photos or drawings: free quote and quick reply.
