Engineering polymers matched to the job

We pick the material to match the part's real constraints: temperature, UV, impact, stiffness or flexibility.

Standard polymers

For prototyping, visual parts and everyday use.

  • PLA

    Polylactic acid

    The most common filament: easy to print, accurate and available in many colours. Ideal for prototypes, models and lightly loaded visual parts.

    • Prototyping
    • Dimensional accuracy
    • Aesthetics
  • PLA+

    Toughened PLA

    A toughened PLA, less brittle and more impact resistant while remaining easy to print.

    • Impact resistant
    • Prototyping
  • PETG

    Glycol-modified polyethylene terephthalate

    A good balance of strength, toughness and chemical resistance. Suited to functional parts, housings and brackets.

    • Impact resistant
    • Chemical resistance
  • ABS

    Acrylonitrile butadiene styrene

    A tough engineering plastic that handles heat better than PLA. Used for housings, covers and mechanical parts.

    • Impact resistant
    • High temperature
  • ASA

    Acrylonitrile styrene acrylate

    Similar to ABS but resistant to UV and weathering. The go-to choice for outdoor parts.

    • UV resistant
    • Impact resistant
  • HIPS

    High-impact polystyrene

    A light, easily machined polystyrene, often used as a soluble support material for ABS.

    • Lightweight
    • Soluble support

Engineering polymers

For functional parts exposed to loads, heat or chemicals.

  • PC

    Polycarbonate

    A polycarbonate with high impact and heat resistance, for heavily loaded technical parts.

    • Impact resistant
    • High temperature
  • PC-ABS

    Polycarbonate-ABS blend

    A blend combining the strength of polycarbonate with the printability of ABS.

    • Impact resistant
    • High temperature
  • PA6 / PA12

    Polyamide (nylon)

    Tough, wear-resistant engineering nylons for gears, hinges, clips and sliding parts.

    • Wear resistant
    • Impact resistant
    • Chemical resistance
  • PP

    Polypropylene

    A light, flexible polypropylene with excellent chemical resistance, for living hinges and containers.

    • Chemical resistance
    • Lightweight
  • POM

    Polyoxymethylene (acetal)

    A low-friction acetal with high dimensional stability, for precise moving mechanical parts.

    • Wear resistant
    • Dimensional accuracy

Carbon and glass fiber composites

High stiffness, low weight and excellent dimensional stability.

  • PLA-CF

    Carbon-fiber filled PLA

    Carbon-fibre filled PLA: stiffer, with a matte, premium finish for light visual parts.

    • Very stiff
    • Aesthetics
  • PETG-CF

    Carbon-fiber filled PETG

    Carbon-fibre reinforced PETG: stiff, stable and strong, for brackets and functional parts.

    • Very stiff
    • Dimensional accuracy
  • PET-CF

    Carbon-fiber filled PET

    Carbon-fibre filled PET with excellent dimensional stability and heat resistance, for jigs, fixtures and technical parts.

    • Very stiff
    • Dimensional accuracy
    • High temperature
  • ASA-CF

    Carbon-fiber filled ASA

    Carbon-fibre reinforced ASA: added stiffness plus UV resistance for outdoor technical parts.

    • Very stiff
    • UV resistant
  • PA-CF

    Carbon-fiber filled polyamide

    Carbon-fibre reinforced nylon: very stiff, light and heat resistant, for demanding mechanical and structural parts.

    • Very stiff
    • High temperature
    • Wear resistant
  • PA-GF

    Glass-fiber filled polyamide

    Glass-fibre reinforced nylon: robust, impact and heat resistant, with good wear resistance.

    • Impact resistant
    • High temperature
  • PC-CF

    Carbon-fiber filled polycarbonate

    Carbon-fibre reinforced polycarbonate: high stiffness and heat resistance for industrial parts.

    • Very stiff
    • High temperature

Flexible materials and elastomers

For seals, guards, dampers and soft parts.

  • TPU

    Thermoplastic polyurethane (85A to 98A)

    A flexible, abrasion-resistant elastomer from 85A (very soft) to 98A (semi-rigid), for seals, guards, dampers and grips.

    • Flexible
    • Wear resistant
  • TPE

    Thermoplastic elastomer

    A very soft, rubber-like elastomer for parts that must deform and spring back.

    • Flexible
  • PEBA

    Polyether block amide

    A light, highly resilient elastomer with excellent energy return, for soles, dampers and sports parts.

    • Flexible
    • Lightweight

High performance

For extreme environments: high temperatures, aggressive chemicals, aerospace requirements. On request.

  • PEEK

    Polyether ether ketone

    A high-performance polymer with outstanding heat, chemical and wear resistance, used in aerospace, medical and industry. On request.

    • High temperature
    • Chemical resistance
  • PEKK

    Polyether ketone ketone

    Similar to PEEK, with excellent strength at high temperature and good fire resistance. On request.

    • High temperature
    • Chemical resistance
  • PEI

    Polyetherimide (ULTEM type)

    Polyetherimide (ULTEM type): stiff, heat resistant and inherently flame retardant, for aerospace and electronics. On request.

    • High temperature
    • Flame retardant
  • PPSU

    Polyphenylsulfone

    A polymer with high heat, impact and chemical resistance that can be sterilised. On request.

    • High temperature
    • Chemical resistance
  • PPS

    Polyphenylene sulfide

    A very stable semi-crystalline polymer resistant to aggressive chemicals and high temperatures. On request.

    • High temperature
    • Chemical resistance
  • PVDF

    Polyvinylidene fluoride

    A fluoropolymer with excellent chemical and UV resistance, for the chemical industry and aggressive fluids. On request.

    • Chemical resistance
    • UV resistant

Special filaments

Specific properties: fire safety, electronics, soluble supports or decorative finishes.

  • V-0

    Flame-retardant polymers (UL94 V-0)

    Flame-retardant filaments rated UL94 V-0, self-extinguishing. For electrical housings, vehicles and transport.

    • Flame retardant
  • ESD

    Anti-static and conductive filaments

    Anti-static or conductive filaments that dissipate electrical charge, for sensitive electronics and ESD areas.

    • Anti-static
  • PVA

    Polyvinyl alcohol

    A water-soluble support material for complex shapes with internal cavities.

    • Soluble support
  • BVOH

    Butenediol vinyl alcohol copolymer

    A water-soluble support that dissolves faster than PVA and works with several materials.

    • Soluble support
  • Wood-fill

    Wood-filled (wood look)

    Wood-fibre filled filament with the look and feel of wood, for decorative objects and models.

    • Decorative
  • Metal-fill

    Metal-filled (metallic look)

    Metal-powder filled filament with metallic weight and finish, polishable, for decorative parts.

    • Decorative

Need another material? Describe your need and we'll look into it. Request a free quote

Process

From your need to the finished part

  1. 01

    Needs analysis

    Send us a part, a drawing, a photo or an idea. We assess feasibility and send you a quote.

  2. 02

    Scanning & CAD design

    3D scanning of the existing part and modeling to your dimensions, tolerances and constraints.

  3. 03

    Prototype & validation

    A printed prototype to validate fit, form and strength before production. This step is optional: if your part is already validated, we go straight to production.

  4. 04

    Production

    Manufacturing of the single part or the batch in the material suited to real-world use.

A project or a part to reproduce?

Send us your ideas, files, photos or drawings: free quote and quick reply.